An ideal assortment of abrasives impregnated with polishing compounds to provide fast and brilliant results on Amalgam restorations without pumice or tin oxide.
Packing:
1/Kit
-
The Kit FG [PN0309] contains:
- Brownie Cups & Midi-Points x 3 pcs each (for pre-polishing)
- Greenie Cups & Midi-Points x 2 pcs each (for polishing)
- Supergreenie Cup & Mid-Point x 1 (for super polishing)
An ideal assortment of abrasives impregnated with polishing compounds to provide fast and brilliant results on Amalgam restorations without pumice or tin oxide.
Packing:
1/Kit
-
The Kit CA [PN0308] contains:
- Brownie Cups & Midi-Points x 3 pcs each (for pre-polishing)
- Greenie Cups & Midi-Points x 2 pcs each (for polishing)
- Supergreenie Cup & Mid-Point x 1 (for super polishing)
Designed for adjustment and polishing of acrylic dentures and appliances chairside or in the laboratory.
Packing:
1/Kit
-
The Kit [PN 0329] contains:
AcryPoint x 8:
- Coarse Grit x 2 each (BP1 & PC2 for adjusting)
- Medium Grit x 1 each (BP1 & PC2 for finishing)
- Fine Grit x 1 each (BP1 & BP2 for polishing)
Robot Carbide Burs for smooth and fast adjustment x 1 each (0620, 0616, 0635 & 0667)
These assortments are designed for contouring and finishing direct resin and glass ionomer restorations.
Packing:
1/Kit
-
The Kit CA [PN 0306] contains:
Dura-Green Stones
- 3 each CN1 & FL2 for adjusting
Dura-White Stones
- 3 each CN1 & FL2 for finishing
Specially selected assortment of T&F Hybrid Points, White Stones and Polishers for finishing and polishing of Glass ionomer and Composite restorations.
Packing:
1/Kit
-
-
The Kit [PN 0323] contains:
- T&F Hybrid Points FG x 2 (for contouring)
- Dura White Stones CA (CN1, FL2, RD1 & RD2 for finishing)
- Composite Points CA (Cup, Midi-Point & Knife for polishing)
- Ceramiste Ultra II CA (Cup, Midi-Point & Knife for polishing) -
An assortment of Brownie, Greenie and Supergreenie points for polishing precious and semi-precious metal alloys to a high-lustre.
Packing:
1/Kit
-
-
The Kit CA [PN0304] contains:
- Brownie KN7, WH6 & PC2 x 2 each (for pre-polishing)
- Greenie KN7, WH6 & PC2 (for polishing)
- Supergreenie KN7, WH6 & PC2 (for super polishing) -
Designed to offer fast, simple and sccurate tooth preparation for a wide range of crown and bridge restorations, veneers and onlays.
Packing:
14's/Kit
-
Precise depth orientation grooves can be achieved easily with the specially designed depth cutting diamond point.
2 special "Tissue-Protective End-Cutting Burs" for shoulder preparation and finishing under gingival margins without injuring the soft tissue.
These points are hygienically organized in an aluminum bur block (autoclavable) for convenient sterilization and easy replacement.14 kinds of specially selected FG Diamond Points in 3 different grits.
Regular: 201, 101, 102R, 104R, 265R, 148 , 122 (No marking on shank)
Fine: F414SS, F414S (Red band on shank)
SuperFine: SF201, SF101, SF102R, SF104R, SF265R (Yellow band on shank) - The Kit contains:
TAPERED FLAT ENDED DIAMOND POINTS
Regular Grit – #201,#101
SuperFine Grit – SF201, SF101
For crown & bridge and metal inlay preparationTAPERED ROUND ENDED DIAMOND POINTS
Regular Grit – #102R
SuperFine Grit – #SF102R
For crown & bridge preparation with a heavy chamferTAPERED ELLIPSE
Regular Grit – #104R
SuperFine Grit – #SF104R
For crown & bridge preparation with a light chamfer and the superfine grit for finishing restorative materialsTISSUE PROTECTIVE END-CUTTING
Fine Grit – #F414SS,F414S
1.0mm depth for anterior tooth, all ceramic crown preparationROUND INVERTED CONE
Regular Grit – #265R,#SF265R
For buccal, palatal and lingual reduction during crown & bridge preparationDOUBLE CONE
Regular Grit – #148
For occlusal reduction during crown & bridge preparationDEPTH CUTTING DIAMOND POINTS
Regular Grit – #122
Specially designed to create depth orientation grooves -
Maximum recommended speed for the burs:
Less than 450,000 rpm: 201, SF201
Less than 300,000 rpm: 101, 102R, 104R, 265R, SF102R, F414SS, F414S, SF101, SF104R, SF265R
Less than 160,000 rpm: 148
Less than 120,000 rpm: 122
These assortments are designed for contouring and finishing direct resin and glass ionomer restorations.
Packing:
1/Kit
-
The Kit FG [PN0302] contains:
Dura-Green Stones
- 3 each CN1 & FL2 for adjusting
Dura-White Stones
- 3 each CN1 & FL2 for finishing
A comprehensive kit specially designed for preparation, adjusting, finishing and polishing of porcelain veneer restorations.
Packing:
1/Kit
-
The Kit [PN 0300] contains:
Diamond Points FG and T&F Hybrid Points FG
- 3 each for preparation, adjusting & finishing
Dura White Stones CA
- 1 each RE1 & FL2 - for fine finishing
Ceramiste Standard CA
- 1 each Wheel & Knife - for pre-polishing
Ceramiste Ultra CA
- 1 each Wheel, Knife & Cup - for polishing
Ceramiste Ultra II CA
- 1 each Wheel, Knife & Cup - for super polishing
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost-effective and available in HP as well as CA shanks to suit all polishing surfaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) -
for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank)
for superpolishing all types of ceramic restorations -
Shape: Minipoint
ISO No.: 030
Shank: CA -
Recommened Speed Range(Mounted Polishers): 10000-15000 rpm/ Max. 20000 rpm, Contact Pressure: 1.5N
Recommended Speed Range(Unmounted Wheel): 5000-10000 rpm/ Max. 15000 rpm, Contact Pressure: 1.5N
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost-effective and available in HP as well as CA shanks to suit all polishing surfaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) -
for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank)
for superpolishing all types of ceramic restorations -
Shape: Knife
ISO No.: 090
Shank: CA -
Recommened Speed Range(Mounted Polishers): 10000-15000 rpm/ Max. 20000 rpm, Contact Pressure: 1.5N
Recommended Speed Range(Unmounted Wheel): 5000-10000 rpm/ Max. 15000 rpm, Contact Pressure: 1.5N
Diamond impregnated polishers with a unique blend of silicone and even distribution of diamond particles for glazed-like polishing of porcelain.
Packing:
3/Box
-
Benefits:
- Durable, cost-effective and available in HP as well as CA shanks to suit all polishing surfaces
- Dense impregnation of natural diamond particles eliminates the need for any messy polishing paste
- Superior surface finish with minimal heat generation and low risk of fracture
Indications:
A simple 2 step finishing and polishing system, ideal for intra-oral, chairside or laboratory use
CeraMaster Coarse (dark gray polisher) -
for quick finishing and pre-polishing of ceramic restorations in just one step; Extremely efficient for adusting ceramic margins of alumina or zirconia coping, without any risk of chipping
CeraMaster (blue and white banded shank)
for superpolishing all types of ceramic restorations -
Shape: KN7
ISO No.: 125
Shank: HP -
Recommened Speed Range(Mounted Polishers): 10000-15000 rpm/ Max. 20000 rpm, Contact Pressure: 1.5N
Recommended Speed Range(Unmounted Wheel): 5000-10000 rpm/ Max. 15000 rpm, Contact Pressure: 1.5N