排序方式：
3 件商品
3 件商品
Premium composite for core build-up and root post cementation.
- Cuts like dentine
- Extremely high compressive strength
- Excellent flow properties
- Reliable curing
- One material for building up and cementing
Automix Packing:
1 x 48g Cartridge
30 x Automix-Tips Yellow
20 x Intraoral-Tips Yellow
10 x Endo-Tips Yellow
Smartmix Packing:
2 x 9g Smartmix-syringes
10 x Smartmix Tips Combi
10 x Smartmix Tips Endo
Instructions for use
LuxaCore Z - Dual
-
Genuine dentine feeling for precise preparation
LuxaCore Z DMG’s premium composite for core build-ups and post cementation provides dentine-like cuttability, which ensures controlled substance removal and a precise preparation margin. LuxaCore Z gives you optimal guidance control of the bur. At the transitions between dentine and LuxaCore Z you will not notice any difference. This tactile stability permits groove-free preparations without any undercuts, presenting ideal conditions for the dental technician to perform precise work.
The result: excellent fit, a long-lasting restoration and the best possible care for your patient.
The right partners allow quality care to be provided perfectly: The LuxaPost composite post and the LuxaBond-Total Etch adhesive system give the dentist the best possible assistance.
Superior values.
LuxaCore Z-Dual is closer to natural dentine than the competition in terms of cutability.
Moreover, the proportion of zirconia gives excellent compressive strength.
This ensures top-quality, natural restorations – and this has been confirmed in figures as well, as shown in the graphs on the right.
Excellent flow properties.
The material‘s outstanding flow properties guarantee optimum adaptation to the shape of cavity walls and posts.
When used as a post cement, the thin film thickness of just 20 μm is beneficial (the limit for precision cement according to ISO 4049 is 25 μm). -
-
Packing:
2 x 9g Automix Syringes
15 x Mix-Tips
15 x Standard Intraoral Tips
10 x Extra-Fine Intraoral Tips
-
Advanced Formula, Dual-Cure CompCore™ AF
Provides exceptional performance and the enhanced light-curing properties save considerable time. If light-curing is not an option – allow CompCore™ AF to self-cure in 4.5 minutes intraorally!
Improved natural appearance
The greater translucency of the enhanced CompCore AF presents a more natural tooth appearance which minimizes the chance of shadows under ceramic crowns- yet provides good contrast and excellent radiopacity.
Outstanding handling for ease of use
CompCore AF Stack will stay put – even in difficult maxillary core build-ups, yet flows under pressure for excellent adaptation. Preps like dentin without ditching.
Superior durability for peace of mind
CompCore AF dental composite core build-up material utilizes exclusive Hyperbranched Technology™1 and nano-fillers for superior mechanical properties and long term clinical success – available in automix SyringeMix™ and cartridge dispensers.
-
compcore_charts_2019-967x500.jpg
-
Bonding Agent
(use only bonding agents compatible with dual-cure composites, such as IntegraBond™)
1. Clean and dry prepared tooth surface.
2. Apply 37% phosphoric acid to the cavo surface for 10 to 15 seconds.
3. Rinse and dry cavo surface, do not desiccate the tooth.
4. Apply first coat of IntegraBond™ on prepared cavo surface. Allow to sit for 15 seconds, and then air dry.
Apply 2 to 3 more coats; without waiting, dry again after last application.
5. Light-cure for 20 seconds
Core Build-Up
1. Bleed syringe. Assemble intraoral tip to mix-tip, attach to syringe and bleed tip.
2. Place intraoral tip into the base of the prepared tooth and dispense. Let material rise around the tip while withdrawing to eliminate air bubbles.
3.Light-cure for 30 seconds. If the core is larger than 8mm, light-cure for at least an additional 10 seconds.*
Check for complete hardness. The preparation can be finished immediately. Alternately, the core can be chemical-cured, final set-time is 4.5 minutes.
Packing:
1 x 50g Cartridge
25 x Mix-Tips
25 x Intraoral Tips
-
Advanced Formula, Dual-Cure CompCore™ AF
Provides exceptional performance and the enhanced light-curing properties save considerable time. If light-curing is not an option – allow CompCore™ AF to self-cure in 4.5 minutes intraorally!
Improved natural appearance
The greater translucency of the enhanced CompCore AF presents a more natural tooth appearance which minimizes the chance of shadows under ceramic crowns- yet provides good contrast and excellent radiopacity.
Outstanding handling for ease of use
CompCore AF Stack will stay put – even in difficult maxillary core build-ups, yet flows under pressure for excellent adaptation. Preps like dentin without ditching.
Superior durability for peace of mind
CompCore AF dental composite core build-up material utilizes exclusive Hyperbranched Technology™1 and nano-fillers for superior mechanical properties and long term clinical success – available in automix SyringeMix™ and cartridge dispensers.
-
compcore_charts_2019-967x500.jpg
-
Bonding Agent
(use only bonding agents compatible with dual-cure composites, such as IntegraBond™)
1. Clean and dry prepared tooth surface.
2. Apply 37% phosphoric acid to the cavo surface for 10 to 15 seconds.
3. Rinse and dry cavo surface, do not desiccate the tooth.
4. Apply first coat of IntegraBond™ on prepared cavo surface. Allow to sit for 15 seconds, and then air dry.
Apply 2 to 3 more coats; without waiting, dry again after last application.
5. Light-cure for 20 seconds
Core Build-Up
1. Bleed syringe. Assemble intraoral tip to mix-tip, attach to syringe and bleed tip.
2. Place intraoral tip into the base of the prepared tooth and dispense. Let material rise around the tip while withdrawing to eliminate air bubbles.
3.Light-cure for 30 seconds. If the core is larger than 8mm, light-cure for at least an additional 10 seconds.*
Check for complete hardness. The preparation can be finished immediately. Alternately, the core can be chemical-cured, final set-time is 4.5 minutes.