排序方式：
61 件商品
61 件商品
Diamond impregnated polishers designed with a unique blend and high density of natural diamond particles to provide an exceptionally smooth surface on any composite material.
Packing:
Mounted Polishers: 3's/Box
Unmounted Wheel: 1pc/Box
-
Benefits:
- Enables simple, fast and efficient polishing and super polishing of composites, for intra oral, chair side or laboratory use
- Durable and cost effective two-step polishing system, available in HP and CA shank
- Precise concentricity with uniform blend of diamond particles in a resilient silicone compound ensures consistent performance with low vibration and minimal heat generation
- Eliminates the need for messy polishing paste
Indications:
Developed for fine finishing to super-polishing of direct resin restorations:
CompoMaster Coarse (yellow polisher) - for finishing & pre-polishing in one step
CompoMaster (yellow & white bands) - for superpolishing -
Recommended Speed Range (Mounted Polishers): 5000-15000 rpm / Max. 20000 rpm, Contact Pressure: 0.5 N
Recommended Speed Range (Unmounted Wheel): 5000-10000 rpm / Max. 15000 rpm, Contact Pressure: 0.5 N
Usage note: Intra-oral polishing is done under dry conditions with intermittent strokes and steam of compressed cool air to avoid excess overheating of the pulp.
Impregnated with silicon carbide in high grade silicone, Ceramiste polisher is suitable for polishing both porcelain and natural enamel.
Packing:
12/Box
-
Benefits:
- Low contact pressure minimises heat generation
- Uniform concentricity for low vibration
- Autoclavable and durable polishers
- Eliminates the need for messy polishing paste
- Cups and Midipoints in CA & FG Shanks only
Indications:
Designed to acheive a glazed-like polish on porcelain and enamel. Systematic polishing in 3 steps:
Standard - for pre-polishing
Ultra (yellow band) - for polishing
Ultra II (white band) - for high gloss polishing -
Recommended Speed Range: 10000-12000 rpm/ Max. FG shank 15000 rpm/ HP & CA Shank 20000 rpm
Contact Pressure: 1-2N
Dura-Green DIA is a vitrified-diamond bonded abrasive designed to provide a consistently smooth, chipless cut on porcelain or all-ceramic substrares. A dense, well-balanced layering of diamond particles embedded from surface to core in a special glass binder ensures greater
durability, cutting efficiency and a smoother surface.
Rotary instruments come in 3 different shanks:
HP (Handpiece) Shank
- A smooth, precise HP shank is attached to the chuck of the straight dental handpiece
Standard diameter of HP shank: 2.35mm
CA (Contra Angle) Shank
- A precisely shaped CA shank fits positively in a CA handpiece and is manually locked in place with the aid of a groove at the lower end of the shank
Standard diameter of CA shank: 2.35
FG (Friction Grip) Shank
- A smooth, even FG shank is used in a high speed turbine handpiece
Standard diameter of FG shank: 1.6mm
Packing:
2/Box
-
Benefits:
- Low vibrations & minimal heat generations minimize the risk of micro fractures
- Low contact pressure & high edge stability
- No residual contaimination on the restoration surface
- Air holes optimally distributed thoughout the abrasive minimizes clogging for a consistent performance
- Available in HP x 8 and CA x 3, total of 11 shapes -
Ideal for contouring and finishing all types of ceramics including porcelain, lithium disilicate and zirconia restorations.
Recommended Speed Range: Max. 30,000rpm
For chairside denture adjustments. Kit includes 5 HP polishers in green (coarse), gray (medium), and beige (fine).
Packing:
Refill: 6/Box
Complete Kit: 3 x #0666, 1 x #0667, 1 x #0668, 1 x TC cutter
-
-
Shank Type: Handpiece
-
Impregnated with silicon carbide abrasive grit for use on porcelain or indirect composite.
Packing:
12/Box
-
Benefits:
- Recommended for polishing porcelain surfaces prior to glazing to lower the firing temperature and enhance aesthetics
- Fine finishing and polishing of porcelain restorations in just one step, by simply altering the contact pressure. Lighter the pressure, higher the gloss
- Uniform concentricity for minimal vibration
- Low heat generation minimizes risk of porcelain micro fracture
Indications:
Specially created for fine finishing, creating surface texture & polishing porcelain as well as indirect composite restorations.
Soft Cut is available in:
PA Grit (green band) - for fine finishing and smoothening after finishing with Dura-Green stones
PB Grit (blue band) - for polishing after fine finishing -
Shape: WH6
ISO No.: 120
Shank: HP -
Recommened Speed Range (Mounted Polishers): 5000-20000 rpm / Max. 20000 rpm, Contact Pressure: 1-2 N
Recommened Speed Range (Unmounted Wheel): 5000-15000 rpm, Contact Pressure: 1-2 N
A specially designed kit for systematic polishing of indirect composite materials such as Ceramage micro-ceramic indirect composite.
Packing:
1 Kit
-
Features
- The Fissure carbide bur is specially designed with a unique trigonal pyramid shaped tip or perfect pointed-end for anatomical carving of pit & fissure, trimming the inner surface of crowns and removal of porosities and excess materials, with superior cutting efficiency to provide precise replication of intricate surface details.
- Dura-Polish is an aluminum oxide impregnated polishing wax for pre-polsihing and polishing of indirect composite, porcelain, metal and denture resin.
- Dura-Polish DIA is a diamond impregnated polishing wax for super polishing of indirect composite and porcelain.
Recommended Polishing Sequence:
- Adjust small parts on the occlusal surface with Robot Carbide Fissure Bur.
- Eliminate scratches on the surface and adjust the surface with SHOFU Silicone Point HR2 and SHOFU Pivot Brush SC.
- Prepolish with SHOFU Pivot Brush using Dura-Polish.
- Superpolish with SHOFU Felt Wheel using Dura-Polish DIA.
Maximum recommended speed:
Robot Carbide Fissure Bur: 50,000 rpm
SHOFU Silicone Point HR2: 20,000 rpm
SHOFU Pivot Brush: 10,000 rpm
SHOFU Pivot Brush SC: 10,000 rpm
SHOFU Felt Wheel: 10,000 rpm
-
The Kit contains:
- Robot Carbide Fissure Bur HP
- Silicone Points HR2 1 each of 11, 13S & 2 pc of 28
- SHOFU Pivot Brush x 1
- SHOFU Pivot Brush SC x 1
- SHOFU Mandrels x 2
- Dura-Polish 20 g x 1 jar
- Dura-Polish DIA 5 g x 1 jar
- SHOFU Felt Wheels x 3 No. 1602 (16 mm diameter, 2 mm thickness) x 2 & No. 2405 x 1 (24 mm diameter, 5 mm thickness)
Lab series stones are made of pure aluminum oxide and are free from carbon contaminants. Use the White Lab Series Stones for finishing noble and predominantly base ceramic metals, Pink Lab Series are for high noble ceramic metals and Coral Lab Series are for chrome-nd nickel alloys.
Packing:
12/Box
-
Features:
- Aluminum oxide grit
- Free from carbon contaminants
- Use Lab Series White & Pink for: precious alloys
- Use Lab Series Coral for: non-precious alloys & model castings -
ISO No.: 040
Shank: HP -
Designed to securely hold all Shofu unmounted wheels and disks for optimal control during laboratory use with a straight handpiece.
Packing:
12/Box
-
Benefits:
- Available in both HP & CA shank, in a box of 12's
- 2 specific types of CA Mandrels are available (Latch type):
1. CA Mandrel with Christmas tree shaped head securely holds the flexible plastic mounts of Super-Snap, Super-Snap Buff and SuperBuff disks in place
2. CA Mandrel (white banded shank) with a specially designed smooth head attached securely to the OneGloss polishers