Sort by:
294 products
294 products
Icon fills the gap between fluoridating and drilling.
Packing:
7 Treatment units each including :
1 x Syringe @ 0.3 ml Icon-Etch
1 x Syringe @ 0.45 ml Icon-Dry
1 x Syringe @ 0.45 ml Icon-Infiltrant
6 x Approximal-Tips
1 x Luer-Lock-Tip
4 x Dental wedges
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
-
- Tooth friendly filling by infiltration – no drilling needed
- Gentle therapy approach for difficult-toreach proximal lesions in just a few steps
- No unnecessary loss of healthy hard tissue
- Prolongs the life expectancy of the tooth
Tips from the practice
1. Exact diagnosis with bitewing x-rays
- Make use of bitewing x-rays for early diagnosis of proximal lesions
- Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
- A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
2. Gentle tooth separation step by step
- It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
- Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
- Hold the wedge in position for several seconds
- Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
3. Documentation in patient records
- Icon is not radiopaque
- This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
- In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
The answer to white spots? I can Icon
Icon Proximal Caries Infiltrant fills the gap between fluoridating and drilling.
Packing:
2 Treatment units each including:
1 x Syringe @ 0.3 ml Icon-Etch
1 x Syringe @ 0.45 ml Icon-Dry
1 x Syringe @ 0.45 ml Icon-Infiltrant
6 x Approximal-Tips
1 x Luer-Lock-Tip
4 x Dental wedges
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
-
- Tooth friendly filling by infiltration – no drilling needed
- Gentle therapy approach for difficult-toreach proximal lesions in just a few steps
- No unnecessary loss of healthy hard tissue
- Prolongs the life expectancy of the tooth
Tips from the practice
1. Exact diagnosis with bitewing x-rays
- Make use of bitewing x-rays for early diagnosis of proximal lesions
- Check the necessity of x-ray images in advance, for example through the use of fiber-optic transillumination devices
- A helpful accessory for these x-rays is the DMG Icon X-ray Holder System. It makes it possible to take multiple images in the same reproducible position, even over several sessions, and therefore simplifies the diagnosis and evaluation of the therapy’s success
2. Gentle tooth separation step by step
- It is best to proceed slowly with the tooth separation, a bit like stretching out a muscle. The tissue has to respond to the increase in pressure
- Guide the wedge into the interdental space until resistance is felt. The patient will experience this as a light pressure
- Hold the wedge in position for several seconds
- Softly push the wedge further until the widest part of the wedge creates enough separation between the teeth
3. Documentation in patient records
- Icon is not radiopaque
- This is because certain filler materials are necessary to make it radiopaque. These materials negatively affect the infiltrant’s flow properties and therefore its penetrative ability
- In order to document the procedure properly, the patient card included in every package should be marked and filed appropriately
The answer to white spots? I can Icon -
-
Icon smooth surface is used to treat white spots in vestibular areas.
Packing:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Brochure
Icon Vestibular
Instructions for use
Icon Vestibular
Safety datasheets
Icon Vestibular
-
- Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
DMG Icon Vestibular Caries Infiltrant 1 units *NEW Edition - With Icon Prime*
DMG Icon Vestibular Caries Infiltrant 1 units *NEW Edition - With Icon Prime*
*NEW Edition - With Icon Prime*
Icon smooth surface is used to treat white spots in vestibular areas.
Icon Prime combines the innovative Icon Dry with MDP (methacryloyloxydecyl dihydrogen phosphate) and offers optimal preparation of the lesion surface for subsequent infiltration with Icon Vestibular.
Packing:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon Prime
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Brochure
Icon Vestibular
Instructions for use
Icon Vestibular
Safety datasheets
Icon Vestibular
-
- Gentle method for counteracting cariogenic white spots- with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Prime) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
Icon smooth surface is used to treat white spots in vestibular areas.
Packing:
7 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
-
- Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
Icon Vestibular Caries Infiltrant is used to treat white spots in vestibular areas.
Packing:
2 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
- - Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
-
-
Mild polyacrylic acid solution designed to remove the dentinal smear layer and to condition dentine and enamel before the application of your glass ionomer.
The estimated time of arrival is around the end of November.
Packing:
Each
