Specially designed diamond charged FG points that mimic carbide burs to ensure rapid and smooth cutting efficiency during cavity preparation and trimming/ fine finishing of composite restorations.
Packing:
10's/Kit
-
Benefits:
- Precise and uniform distribution of diamond particles ensures accurate cavity preparation and an exceptionally smooth surface finish
- Specially made diamond burs ensure high cutting efficiency with low contact pressure and consistent performance
- Sturdy stainless steel shank ensures precise concentricity with virtually no vibration
- Feather-light strokes assure minimal heat generation for maximum patient comfort
- Hybrid Points come in 12 popular shapes/ sizes
- T&F Hybrid Points (with yellow banded shank) come in 10 different shapes/ sizes -
0925-1
ISO No.: 018
Head Length (mm): 1.6
Bur No.: 7006
0927-1
ISO No.: 014
Head Length (mm): 3.0
Bur No.: 7104
0929-1
ISO No.: 018
Head Length (mm): 3.5
Bur No.: 7106
0931-1
ISO No.: 014
Head Length (mm): 3.0
Bur No.: 7404
0933-1
ISO No.: 018
Head Length (mm): 3.5
Bur No.: 7406
0935-1
ISO No.: 012
Head Length (mm): 4.0
Bur No.: 7803
0937-1
ISO No.: 009
Head Length (mm): 3.7
Bur No.: 7901
0939-1
ISO No.: 012
Head Length (mm): 4.2
Bur No.: 7903
0941-1
ISO No.: 013
Head Length (mm): 6.0
Bur No.: LT1
0943-1
ISO No.: 011
Head Length (mm): 8.0
Bur No.: LT2
-
Recommended Speed Range: 300,000-450,000 rpm (Cyan Colour: max 450,000 rpm, Red Colour: Max 300,000 rpm)
Contact Pressure: 0.8 N
Made of a high concentration of aluminium oxide with silicone as binder, created specially for finishing and polishing of direct resin restorations with only one instrument, just by altering the contact pressure.
OneGloss Complete Set Contains:
Unmounted Polishers x 20 each shape, CA Mandrels x3
Packing:
20/Unmounted Polishers
3/CA Mandrels
-
Benefits:
- Saves time as finishing and polishing can be achieved with a single instrument
- Eliminates the need for polishing paste
- Disposable polishers comply with infection control protocols
- Low vibration and minimal heat generation
Indications:
Ideal for:
- Finishing and polishing of all tooth coloured restorations
- Creating surface texture on direct cosmetic restorations
- Removing surface stain without damaging the enamel
- Polishing enamel after scaling
- Removing excess cement without marring enamel or damaging delicate inlays
- Removing excess cement after Orthodontic debanding -
Shape: Cup, Midipoint, IC, Mandrel
ISO No.: 060, 060, 100
-
Recommened Speed Range: 3000-10000 rpm/ Max. 15000 rpm
Contact Pressure: 1N (for Finishing)/ Feather Light (for Polishing)
Usage Note: Water coolant when finishing & Dry when polishing
Specially selected assortment of white stones and porcelain polishers for chair-side adjustment and glazed like polishing of porcelain restorations prior to placement without the tedious refiring process.
Packing:
1/Kit
-
The Kit [PN 0301] contains:
Dura White Stones HP
- 1 each CN1, FL3 & RE1 for adjusting & finishing
Ceramiste Points HP
- 1 each KN7, PC2 & WH6 in Standard, Ultra & Ultra II grits for polishing
These assortments are designed for contouring and finishing direct resin and glass ionomer restorations.
Packing:
1/Kit
-
The Kit FG [PN0302] contains:
Dura-Green Stones
- 3 each CN1 & FL2 for adjusting
Dura-White Stones
- 3 each CN1 & FL2 for finishing
These assortments are designed for contouring and finishing direct resin and glass ionomer restorations.
Packing:
1/Kit
-
The Kit CA [PN 0306] contains:
Dura-Green Stones
- 3 each CN1 & FL2 for adjusting
Dura-White Stones
- 3 each CN1 & FL2 for finishing
A comprehensive assortment for finishing and polishing of direct resins and glass ionomers.
Packing:
1/Kit
-
The Kit [PN 0310] contains:
Dura-Green Stones CA
- 1 each CN1 & FL2 for reduction of excess material
Dura-White Stones CA
- 1 each CN1 & FL2 for finishing
CompoSite Polishers CA
- 2 each for Pre-Polishing
CompoSite Fine Polishers CA
- 1 each Cup & Disk for Super-Polishing without damaging enamel
Designed to offer fast, simple and sccurate tooth preparation for a wide range of crown and bridge restorations, veneers and onlays.
Packing:
14's/Kit
-
Precise depth orientation grooves can be achieved easily with the specially designed depth cutting diamond point.
2 special "Tissue-Protective End-Cutting Burs" for shoulder preparation and finishing under gingival margins without injuring the soft tissue.
These points are hygienically organized in an aluminum bur block (autoclavable) for convenient sterilization and easy replacement.14 kinds of specially selected FG Diamond Points in 3 different grits.
Regular: 201, 101, 102R, 104R, 265R, 148 , 122 (No marking on shank)
Fine: F414SS, F414S (Red band on shank)
SuperFine: SF201, SF101, SF102R, SF104R, SF265R (Yellow band on shank) - The Kit contains:
TAPERED FLAT ENDED DIAMOND POINTS
Regular Grit – #201,#101
SuperFine Grit – SF201, SF101
For crown & bridge and metal inlay preparationTAPERED ROUND ENDED DIAMOND POINTS
Regular Grit – #102R
SuperFine Grit – #SF102R
For crown & bridge preparation with a heavy chamferTAPERED ELLIPSE
Regular Grit – #104R
SuperFine Grit – #SF104R
For crown & bridge preparation with a light chamfer and the superfine grit for finishing restorative materialsTISSUE PROTECTIVE END-CUTTING
Fine Grit – #F414SS,F414S
1.0mm depth for anterior tooth, all ceramic crown preparationROUND INVERTED CONE
Regular Grit – #265R,#SF265R
For buccal, palatal and lingual reduction during crown & bridge preparationDOUBLE CONE
Regular Grit – #148
For occlusal reduction during crown & bridge preparationDEPTH CUTTING DIAMOND POINTS
Regular Grit – #122
Specially designed to create depth orientation grooves -
Maximum recommended speed for the burs:
Less than 450,000 rpm: 201, SF201
Less than 300,000 rpm: 101, 102R, 104R, 265R, SF102R, F414SS, F414S, SF101, SF104R, SF265R
Less than 160,000 rpm: 148
Less than 120,000 rpm: 122
The kit offers unique shapes of diamond points for deoth orientation, minimally invasive cavity preparation and direct veneer preparation.
Packing:
1/Kit
-
A carefully selected assortment of diamond points to help achieve accuracy and efficiency during tooth preparation and contouring/ finishing of direct cosmetic restorations with special attention to preservation of tooth structure.
The Diamond Points are hygienically organized in n aluminum bur block (autoclavable) for convenient sterilization and easy replacement. -
The Kit [PN F272] contains:
Diamond Points FG x 8, in 3 different grits (Regular, Fine & Superfine) -
Designed for adjustment and polishing of acrylic dentures and appliances chairside or in the laboratory.
Packing:
1/Kit
-
The Kit [PN 0329] contains:
AcryPoint x 8:
- Coarse Grit x 2 each (BP1 & PC2 for adjusting)
- Medium Grit x 1 each (BP1 & PC2 for finishing)
- Fine Grit x 1 each (BP1 & BP2 for polishing)
Robot Carbide Burs for smooth and fast adjustment x 1 each (0620, 0616, 0635 & 0667)
Specially designed aluminum oxide impregnated felt disks with easy to use snap-on system for superpolishing all direct resins.
Packing:
1/Kit
-
Benefits:
- Integrated polishing paste in the disk ensures faster polishing while keeping the work area clean
- Disks can be soaked in water until soft and flexible to activate polishing compound just before use
-Thick disk design enables super polishing of occlusal surfaces efficiently
- Able to super polish multiple surfaces in a single bound without the mess of polishing pastes
Indications:
Developed to achieve high gloss polishing of all types of direct tooth coloured restorations. -
Packed in a box of 25 disk with 2 CA mandrels [PN 0535]
-
Recommened Speed Range : 8000-12000 rpm/ Max. 15000 rpm
Contact Pressure: 0.8 N
Usage Note: Moisten completely before use
Super-Snap X-Treme Technique Mini Kit, the newest trial kit for clinicians to obtain an excellent natural luster on direct aesthetic restorations. This kit comes with 4 color-coded disks: Black, Violet as well as the new X-Treme Green and X-Treme Red disks in both 12 mm and 8 mm diameter with additional CompoSite Fine Midi-point, for finishing and polishing all areas of the restoration.
Packing:
1/Kit
-
Features:
- Extra thick aluminium oxide impregnated X-Treme Green and Red disks allow greater tactile feel and better durability to achieve a natural luster with ease
- Advanced 3D coating aluminium oxide impregnated X-Treme Red disks facilitate efficient discharge of ground debris and heat dissipation for natural gloss and exceptional luster surface with virtually no secondary surface scratches
Indications:
Finishing and polishing of all direct aesthetic resin materials, especially in anterior region.
-
Super-Snap X-Treme Technique Mini Kit contains:
Disks x 48, CompoSite Fine Midi-Point CA x 1, CA Mandrels x 1 -
A comprehensive and resilient, diamond impregnated finishing and polishing system for lab/ chairside use, containing an assortment of Dura-Green DIA and colour-coded ZiLMaster Polishers that provide the highest natural lustre on all types of modern ceramics including Zirconia and Lithium Disilicate restoration.
Packing:
1/Kit
-
Features:
This kit is suitable for finishing and polishing oxide and silicate ceramic restoration
- Fast and efficient contouring with Dura-Green DIA. Dura-Green DIA comprises of densely packed diamond particles from the surface to the core of the abrasive head to enable superior and consistent cutting efficiency until the entire abrasive is worn out
- Fine finishing and smoothening to eliminate all remaining scratches with ZiLMaster Coarse
- Pre-polishing with ZiLMaster Medium
- High lustre polishing with ZiLMaster Fine ZiLMaster polishers are designed with an excellent balance of the diamond particle size, distribution and the resilient silicone binder to assure the smoothest surface and high natural gloss with minimal wear of the abrasive
- The durable abrasive points are autoclavable and durable -
The Kit contains:
Dura-Green DIA – TC4, KN7 & WH6 x 1 each
ZiLMaster Coarse HP – Bullet, KN7 & WH6 x 1 each
ZiLMaster Medium HP – Bullet, KN7 & WH6 x 1 each
ZiLMaster Fine HP – Bullet, KN7 & WH6 x 1 each -
Recommened Speed Range:
Dura-Green DIA: 30,000 rpm
ZiLMaster Coarse / Medium / Fine: 20,000 rpm