Premier® Implant Cement™ is a tough elastomeric resin that flexes under force, absorbs shock and resists breaking down under daily occlusal stresses. The innovative formula creates a tight marginal seal and will not wash out.
Packing:
1 x 5ml Automix Syringe
10 x Mix Tips
1 x Mixing pad
-
Secure Retention
Strength and durability of resin cements for long lasting hold.
Retrievable
Mechanical retention only – not chemical – allows future restoration removal for retreatment or adjustments.
No Fluoride
Non-fluoride formulation safe for all alloys including titanium.
Tight marginal seal protects implant from potentially corrosive high fluoride environments.
Easy to Use
No adhesives or primers. Package comes complete with auto mix syringe and mix tips.
Packing:
1 x 50g Cartridge
25 x Mix-Tips
25 x Intraoral Tips
-
Advanced Formula, Dual-Cure CompCore™ AF
Provides exceptional performance and the enhanced light-curing properties save considerable time. If light-curing is not an option – allow CompCore™ AF to self-cure in 4.5 minutes intraorally!
Improved natural appearance
The greater translucency of the enhanced CompCore AF presents a more natural tooth appearance which minimizes the chance of shadows under ceramic crowns- yet provides good contrast and excellent radiopacity.
Outstanding handling for ease of use
CompCore AF Stack will stay put – even in difficult maxillary core build-ups, yet flows under pressure for excellent adaptation. Preps like dentin without ditching.
Superior durability for peace of mind
CompCore AF dental composite core build-up material utilizes exclusive Hyperbranched Technology™1 and nano-fillers for superior mechanical properties and long term clinical success – available in automix SyringeMix™ and cartridge dispensers.
-
compcore_charts_2019-967x500.jpg
-
Bonding Agent
(use only bonding agents compatible with dual-cure composites, such as IntegraBond™)
1. Clean and dry prepared tooth surface.
2. Apply 37% phosphoric acid to the cavo surface for 10 to 15 seconds.
3. Rinse and dry cavo surface, do not desiccate the tooth.
4. Apply first coat of IntegraBond™ on prepared cavo surface. Allow to sit for 15 seconds, and then air dry.
Apply 2 to 3 more coats; without waiting, dry again after last application.
5. Light-cure for 20 seconds
Core Build-Up
1. Bleed syringe. Assemble intraoral tip to mix-tip, attach to syringe and bleed tip.
2. Place intraoral tip into the base of the prepared tooth and dispense. Let material rise around the tip while withdrawing to eliminate air bubbles.
3.Light-cure for 30 seconds. If the core is larger than 8mm, light-cure for at least an additional 10 seconds.*
Check for complete hardness. The preparation can be finished immediately. Alternately, the core can be chemical-cured, final set-time is 4.5 minutes.
Packing:
2 x 9g Automix Syringes
15 x Mix-Tips
15 x Standard Intraoral Tips
10 x Extra-Fine Intraoral Tips
-
Advanced Formula, Dual-Cure CompCore™ AF
Provides exceptional performance and the enhanced light-curing properties save considerable time. If light-curing is not an option – allow CompCore™ AF to self-cure in 4.5 minutes intraorally!
Improved natural appearance
The greater translucency of the enhanced CompCore AF presents a more natural tooth appearance which minimizes the chance of shadows under ceramic crowns- yet provides good contrast and excellent radiopacity.
Outstanding handling for ease of use
CompCore AF Stack will stay put – even in difficult maxillary core build-ups, yet flows under pressure for excellent adaptation. Preps like dentin without ditching.
Superior durability for peace of mind
CompCore AF dental composite core build-up material utilizes exclusive Hyperbranched Technology™1 and nano-fillers for superior mechanical properties and long term clinical success – available in automix SyringeMix™ and cartridge dispensers.
-
compcore_charts_2019-967x500.jpg
-
Bonding Agent
(use only bonding agents compatible with dual-cure composites, such as IntegraBond™)
1. Clean and dry prepared tooth surface.
2. Apply 37% phosphoric acid to the cavo surface for 10 to 15 seconds.
3. Rinse and dry cavo surface, do not desiccate the tooth.
4. Apply first coat of IntegraBond™ on prepared cavo surface. Allow to sit for 15 seconds, and then air dry.
Apply 2 to 3 more coats; without waiting, dry again after last application.
5. Light-cure for 20 seconds
Core Build-Up
1. Bleed syringe. Assemble intraoral tip to mix-tip, attach to syringe and bleed tip.
2. Place intraoral tip into the base of the prepared tooth and dispense. Let material rise around the tip while withdrawing to eliminate air bubbles.
3.Light-cure for 30 seconds. If the core is larger than 8mm, light-cure for at least an additional 10 seconds.*
Check for complete hardness. The preparation can be finished immediately. Alternately, the core can be chemical-cured, final set-time is 4.5 minutes.
Implant Scaler Double End Universal Graphite Resin 2/Package
Packing:
2/Package
Mylar anterior bands with integrated stopper turns a three-handed dental procedure into a two-handed one. Light-cure Class III and IV restorations with ease.
Packing:
100/Pack