Icon Vestibular Caries Infiltrant is used to treat white spots in vestibular areas.
Packing:
2 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
- - Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
-
-
Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations. Instructions for Use
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.
Ionosit-Baseliner – for stress-free restorations.
Packing:
3 x 0.33g Saferinge
Ionosit-Baseliner
-
- Unique compensation for composite polymerization shrinkage stress
- Fluoride release
- Antibacterial properties
- No complicated handmixing
- Protects the pulp
- Seals the dentine tubules
- Prevents postoperative sensitivities
- Radio-opaque -
-
Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations. Instructions for Use
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.
Ionosit-Baseliner – for stress-free restorations.
Packing:
20 x 0.33g Saferinge
Ionosit-Baseliner
-
- Unique compensation for composite polymerization shrinkage stress
- Fluoride release
- Antibacterial properties
- No complicated handmixing
- Protects the pulp
- Seals the dentine tubules
- Prevents postoperative sensitivities
- Radio-opaque -
-
Ionosit-Baseliner is the »stress breaker« among the dental materials. This light curing active baseliner is the ideal one-component underfilling material for composite restorations. Instructions for Use
Its active chemistry compensates for the shrinkage typical with composite fillings, prevents marginal gap formations, and, with that, minimizes postoperative sensitivities, microfractures and secondary caries.
The material is radiopaque, provides fluoride release, and, due to its zinc content, has antibacterial properties.
Ionosit-Baseliner – for stress-free restorations.
Packing:
2 x 1.5g Syringes
Ionosit-Baseliner
-
- Unique compensation for composite polymerization shrinkage stress
- Fluoride release
- Antibacterial properties
- No complicated handmixing
- Protects the pulp
- Seals the dentine tubules
- Prevents postoperative sensitivities
- Radio-opaque -
-
LuxaBite is an innovative rigid bisacryl bite registration material that combines superior handling properties and a firmer setting to yield the most accurate, hard and stable bite registrations on the market. Developed with industry-leading clinicians Ross Nash, DDS, David Hornbrook, DDS, FAACD, and Mark Montgomery, DMD, LuxaBite is the ideal bite registration choice for all types of bite relationships.
Brochure Instructions for use
Packing:
1 x 50ml Cartridge
15 x Automix Tips
LuxaBite
LuxaBite
-
- Excellent stability
- The hardest bite registration material
- No compression on mounting
- Patient-friendly formula: tasteless and odorless
- Easy to trim with a high-speed bur
- Superior accuracy
- Offers minimal resistance to closure of teeth
- Fast setting
Rigid bite registration
Its thixotropic properties prevent the material from flowing into approximal spaces, and its superior final high hardness (Shore D-69, or Barcol 25 after 1hr) eliminates compression or flexing when mounted to facilitate precise bite registrations. LuxaBite is automatically mixed to a homogenous, bubble-free, non-slumping consistency and can be directly applied.
And, besides LuxaBite’s stability when positioned on the model, dental assistants value the conveniently easy excess removal with a dental bur. After all, the material should be hard, not the work.
Hardest quality bite registrations
Besides a precise impression material an exact bite registration is the key for the fabrication of high-quality and perfectly fitting restorations.
With its outstanding rigidity LuxaBite provides the prerequisite for a precise reproduction of the oral situation, enabling the dentist to integrate perfectly fitting restorations without the need for corrections. The contrasting blue color record is break-proof and easy to trim.
LuxaBite’s extreme hardness combined with the user-friendly application with the Automix guarantees a clean and reliable fixation.
Its superior handling properties and firmer setting yield the most accurate and stable bite registrations on the market. -
Composition: Bisacryl (Glass filler in a matrix of multifunctional methacrylates - no methyl methacrylate or peroxides)
Total Working Time: 45 seconds after start mix
Rubbery Phase: 2-2:30 minutes after start mix
End of Setting: 4 minutes after removal from mouth
Barcol Hardness: 20 after 1 hour -
Dual-curing adhesive system
- Self-curing: Hardens even without light
- No premature polymerization of bonding »pools«
- Compatible with self-curing and dual-curing materials
- Suitable for all applications with LuxaCore
- Pre-Bond facilitates quicker curing of the bond mix in the dentine for superior retention
- Easy root canal application with special
- Endobrushes
- Does not contain acetone
Packing:
1/Package
-
Flexible range of applications
LuxaBond-Total Etch is the final component in DMG‘s product range for post-endodontic restorations. The adhesive system is also suitable for fixing inlays. Self-curing does more than just allow it to be used in areas that the light does not reach.
Even the unwanted premature curing of pools on the floor of the cavity (the »pooling effect«) can be avoided, as the curing can also be done entirely after insertion of the post. LuxaBond-Total Etch can generally be used with LuxaCoreZ-Dual for core build-up or for adhesive cementation of crowns and bridges with Vitique or PermaCem. In these cases, there is the option of curing it with light.
Reliable bond
The pre-bonding that facilitates the superior bonding properties of the system is applied after separate etching of the enamel and the dentine. It ensures that the bonding mixture (consisting of components A and B) hardens very quickly after application to the tooth material. It means that a ready-made anchor layer is present even before the introduction of the restoration material. In addition, the pre-bonding allows a longer processing time for the bonding mixture, as its curing is only accelerated when it comes into contact with the pre-bond. For easy handling, the order of application is specified on the bottles, with color codes to indicate the bond components. -
1 x Bottle @ 5 ml Pre-Bond
1 x Bottle @ 5 ml Bond A
1 x Bottle @ 5 ml Bond B
1 x Syringe @ 2 ml Etching Gel Medium Viscosity
25 x Endobrushes Red
25 x Endobrushes Black
3 x Luer-Lock-Tips
1 Mixing pad -
Premium composite for core build-up and root post cementation.
- Cuts like dentine
- Extremely high compressive strength
- Excellent flow properties
- Reliable curing
- One material for building up and cementing
Packing:
1 x 48g Cartridge
30 x Automix-Tips Yellow
20 x Intraoral-Tips Yellow
10 x Endo-Tips Yellow
Instructions for use
LuxaCore Z - Dual
-
Genuine dentine feeling for precise preparation
LuxaCore Z DMG’s premium composite for core build-ups and post cementation provides dentine-like cuttability, which ensures controlled substance removal and a precise preparation margin. LuxaCore Z gives you optimal guidance control of the bur. At the transitions between dentine and LuxaCore Z you will not notice any difference. This tactile stability permits groove-free preparations without any undercuts, presenting ideal conditions for the dental technician to perform precise work.
The result: excellent fit, a long-lasting restoration and the best possible care for your patient.
The right partners allow quality care to be provided perfectly: The LuxaPost composite post and the LuxaBond-Total Etch adhesive system give the dentist the best possible assistance.
Superior values.
LuxaCore Z-Dual is closer to natural dentine than the competition in terms of cutability.
Moreover, the proportion of zirconia gives excellent compressive strength.
This ensures top-quality, natural restorations – and this has been confirmed in figures as well, as shown in the graphs on the right.
Excellent flow properties.
The material‘s outstanding flow properties guarantee optimum adaptation to the shape of cavity walls and posts.
When used as a post cement, the thin film thickness of just 20 μm is beneficial (the limit for precision cement according to ISO 4049 is 25 μm). -
-
Premium composite for core build-up and root post cementation.
- Cuts like dentine
- Extremely high compressive strength
- Excellent flow properties
- Reliable curing
- One material for building up and cementing
Packing:
1 x 48g Cartridge
30 x Automix-Tips Yellow
20 x Intraoral-Tips Yellow
10 x Endo-Tips Yellow
Instructions for use
LuxaCore Z - Dual
-
Genuine dentine feeling for precise preparation
LuxaCore Z DMG’s premium composite for core build-ups and post cementation provides dentine-like cuttability, which ensures controlled substance removal and a precise preparation margin. LuxaCore Z gives you optimal guidance control of the bur. At the transitions between dentine and LuxaCore Z you will not notice any difference. This tactile stability permits groove-free preparations without any undercuts, presenting ideal conditions for the dental technician to perform precise work.
The result: excellent fit, a long-lasting restoration and the best possible care for your patient.
The right partners allow quality care to be provided perfectly: The LuxaPost composite post and the LuxaBond-Total Etch adhesive system give the dentist the best possible assistance.
Superior values.
LuxaCore Z-Dual is closer to natural dentine than the competition in terms of cutability.
Moreover, the proportion of zirconia gives excellent compressive strength.
This ensures top-quality, natural restorations – and this has been confirmed in figures as well, as shown in the graphs on the right.
Excellent flow properties.
The material‘s outstanding flow properties guarantee optimum adaptation to the shape of cavity walls and posts.
When used as a post cement, the thin film thickness of just 20 μm is beneficial (the limit for precision cement according to ISO 4049 is 25 μm). -
-
Premium composite for core build-up and root post cementation. Instructions for use
- Cuts like dentine
- Extremely high compressive strength
- Excellent flow properties
- Reliable curing
- One material for building up and cementing
Packing:
1 x 48g Cartridge
30 x Automix-Tips Yellow
20 x Intraoral-Tips Yellow
10 x Endo-Tips Yellow
LuxaCore Z - Dual
-
Genuine dentine feeling for precise preparation
LuxaCore Z DMG’s premium composite for core build-ups and post cementation provides dentine-like cuttability, which ensures controlled substance removal and a precise preparation margin. LuxaCore Z gives you optimal guidance control of the bur. At the transitions between dentine and LuxaCore Z you will not notice any difference. This tactile stability permits groove-free preparations without any undercuts, presenting ideal conditions for the dental technician to perform precise work.
The result: excellent fit, a long-lasting restoration and the best possible care for your patient.
The right partners allow quality care to be provided perfectly: The LuxaPost composite post and the LuxaBond-Total Etch adhesive system give the dentist the best possible assistance.
Superior values.
LuxaCore Z-Dual is closer to natural dentine than the competition in terms of cutability.
Moreover, the proportion of zirconia gives excellent compressive strength.
This ensures top-quality, natural restorations – and this has been confirmed in figures as well, as shown in the graphs on the right.
Excellent flow properties.
The material‘s outstanding flow properties guarantee optimum adaptation to the shape of cavity walls and posts.
When used as a post cement, the thin film thickness of just 20 μm is beneficial (the limit for precision cement according to ISO 4049 is 25 μm). -
-
Premium composite for core build-up and root post cementation.
- Cuts like dentine
- Extremely high compressive strength
- Excellent flow properties
- Reliable curing
- One material for building up and cementing
Packing:
2 x 9g Smartmix-syringes
10 x Smartmix Tips Combi
10 x Smartmix Tips Endo
Instructions for use
LuxaCore Z - Dual
-
Genuine dentine feeling for precise preparation
LuxaCore Z DMG’s premium composite for core build-ups and post cementation provides dentine-like cuttability, which ensures controlled substance removal and a precise preparation margin. LuxaCore Z gives you optimal guidance control of the bur. At the transitions between dentine and LuxaCore Z you will not notice any difference. This tactile stability permits groove-free preparations without any undercuts, presenting ideal conditions for the dental technician to perform precise work.
The result: excellent fit, a long-lasting restoration and the best possible care for your patient.
The right partners allow quality care to be provided perfectly: The LuxaPost composite post and the LuxaBond-Total Etch adhesive system give the dentist the best possible assistance.
Superior values.
LuxaCore Z-Dual is closer to natural dentine than the competition in terms of cutability.
Moreover, the proportion of zirconia gives excellent compressive strength.
This ensures top-quality, natural restorations – and this has been confirmed in figures as well, as shown in the graphs on the right.
Excellent flow properties.
The material‘s outstanding flow properties guarantee optimum adaptation to the shape of cavity walls and posts.
When used as a post cement, the thin film thickness of just 20 μm is beneficial (the limit for precision cement according to ISO 4049 is 25 μm). -
-
Premium composite for core build-up and root post cementation.
- Cuts like dentine
- Extremely high compressive strength
- Excellent flow properties
- Reliable curing
- One material for building up and cementing
Packing:
2 x 9g Smartmix-syringes
10 x Smartmix Tips Combi
10 x Smartmix Tips Endo
Instructions for use
LuxaCore Z - Dual
-
Genuine dentine feeling for precise preparation
LuxaCore Z DMG’s premium composite for core build-ups and post cementation provides dentine-like cuttability, which ensures controlled substance removal and a precise preparation margin. LuxaCore Z gives you optimal guidance control of the bur. At the transitions between dentine and LuxaCore Z you will not notice any difference. This tactile stability permits groove-free preparations without any undercuts, presenting ideal conditions for the dental technician to perform precise work.
The result: excellent fit, a long-lasting restoration and the best possible care for your patient.
The right partners allow quality care to be provided perfectly: The LuxaPost composite post and the LuxaBond-Total Etch adhesive system give the dentist the best possible assistance.
Superior values.
LuxaCore Z-Dual is closer to natural dentine than the competition in terms of cutability.
Moreover, the proportion of zirconia gives excellent compressive strength.
This ensures top-quality, natural restorations – and this has been confirmed in figures as well, as shown in the graphs on the right.
Excellent flow properties.
The material‘s outstanding flow properties guarantee optimum adaptation to the shape of cavity walls and posts.
When used as a post cement, the thin film thickness of just 20 μm is beneficial (the limit for precision cement according to ISO 4049 is 25 μm). -
-