Sort by:
127 products
127 products
Icon smooth surface is used to treat white spots in vestibular areas.
Packing:
7 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
-
- Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
Icon Vestibular Caries Infiltrant is used to treat white spots in vestibular areas.
Packing:
2 Treatment units each including:
1 x Syringe @ 0,45 ml Icon-Etch
1 x Syringe @ 0,45 ml Icon-Dry
1 x Syringe @ 0,45 ml Icon-Infiltrant
6 x Vestibular-Tips
1 x Luer-Lock-Tip
Instructions for use
Icon
Safety datasheets
Icon Infiltrant
- - Gentle method for counteracting cariogenic white spots – with an esthetic side effect
- No unnecessary loss of healthy hard tissue
- User-friendly and patient-friendly application process in only one sitting
Tips from the practice
1. Re-etching »older« inactive white spots
- You can etch multiple times if there is a very thick pseudo-intact surface layer
- If the white discoloration disappears within a few seconds when ethanol (Icon-Dry) is applied, then it is sufficiently etched
- If the opaque discoloration remains, then the etching process should be repeated
- Up to three etching steps for two minutes per lesion are possible
2. Before/after documentation
- Optimize your patient communication process by taking before and after pictures
- These photos give your patients definitive proof about the success of the treatment
3. Fluorosis and other white spots
- Even non-cariogenic enamel changes can be treated with Icon.
- Experiences in practice show: Patients with fluorosis can be successfully treated, where it has proved useful to repeat the etching steps multiple times. Awaiting confirmation from clinical studies
- Enamel changes caused by trauma have been successfully treated. Awaiting confirmation from clinical studies
-
-
GC Fuji II LC is a light-cured glass ionomer restorative with outstanding flexural strength and excellent bond strength to teeth even in presence of saliva. GC Fuji II LC’s exceptional esthetics, simplicity and economy make it a fantastic choice for Class V restorations, cervical erosions/abfraction lesions and as a liner/base.
Packing:
Each
Brochures
Glass Ionomer
Instructions for Use
GC Fuji II LC IFU
-
-
Additives: Fluoride Releasing
Composition/Ingredients: Resin-Reinforced
Cure Type: Light Cure
Item Type: Powder / Liquid
Packaging Type: 1:1 Package
Radiopaque: Radiopaque
Shade: A3 -
GC Fuji II LC is a light-cured glass ionomer restorative with outstanding flexural strength and excellent bond strength to teeth even in presence of saliva. GC Fuji II LC’s exceptional esthetics, simplicity and economy make it a fantastic choice for Class V restorations, cervical erosions/abfraction lesions and as a liner/base.
Brochures Instructions for Use
Packing:
Each
Glass Ionomer
GC Fuji II LC IFU
-
-
Additives: Fluoride Releasing
Composition/Ingredients: Resin-Reinforced
Cure Type: Light Cure
Item Type: Powder / Liquid
Packaging Type: 1:1 Package
Radiopaque: Radiopaque
Shade: A2 -
GC Fuji II LC is a light-cured glass ionomer restorative with outstanding flexural strength and excellent bond strength to teeth even in presence of saliva. GC Fuji II LC’s exceptional esthetics, simplicity and economy make it a fantastic choice for Class V restorations, cervical erosions/abfraction lesions and as a liner/base.
Brochures Instructions for Use
Packing:
Each
Glass Ionomer
GC Fuji II LC IFU
-
-
Additives: Fluoride Releasing
Composition/Ingredients: Resin-Reinforced
Cure Type: Light Cure
Item Type: Powder / Liquid
Packaging Type: 1:1 Package
Radiopaque: Radiopaque
Shade: A3.5 -
GC Fuji II Restorative Powder / Liquid 22 Yellow Brown 1:1 Package Each
GC Fuji II Restorative Powder / Liquid 22 Yellow Brown 1:1 Package Each
Glass-ionomer restorative that features high water resistance. Chemically bonds to tooth structure. Surface hardness produces a stain-free, long-lasting finish. Fluoride-releasing and radiopaque.
Packing:
Each
-
-
Additives: Fluoride Releasing
Item Type: Powder / Liquid
Packaging Type: 1:1 Package
Radiopaque: Radiopaque
Shade: 22 Yellow Brown -
Glass-ionomer restorative that features high water resistance. Chemically bonds to tooth structure. Surface hardness produces a stain-free, long-lasting finish. Fluoride-releasing and radiopaque.
Packing:
Each
-
-
Additives: Fluoride Releasing
Item Type: Powder / Liquid
Packaging Type: 1:1 Package
Radiopaque: Radiopaque
Shade: 23 Dark Gray -
Radiopaque, packable, posterior, glass-ionomer restorative. It is strong, wear resistant, and fluoride releasing. Chemically bonds to tooth structure. Can be used as a base under composites and for basic core buildups. Great alternative to compomers, composites, and amalgam.
Packing:
Each
-
Packable, dough-like consistency
- Easy to handle and place
- Can be condensed (similar to amalgam)
- Shape and finish with metal instruments
Non-sticky
- Will not pull away from prep or stick to instruments
High compressive and flexural strengths
- Assure durability, longevity, and integrity
Excellent wear characteristics
- 60% higher than conventional glass ionomers
- Within 10% of compomer materials
- Wears at only a slightly higher rate than posterior composites
Simple and easy technique
- 2 minute working time
- Self-cures in 2.5 minutes (about 4.5 minutes from start of mix)
- Single step placement for even larger fillings -
Additives: Fluoride Releasing
Cure Type: Self Cure
Ergonomic Location: Posterior
Item Type: Powder / Liquid
Packaging Type: 1:1 Package
Radiopaque: Radiopaque
Shade: A2
Viscosity: Packable -