Sort by:
326 products
326 products
Designed for cavity and tooth preparation in 88 different shapes, some shapes are available in short (1000 class) and supershort (3000 class) shanks.
Packing:
10/Box
-
Benefits:
- Uniform distribution of natural diamond particles ensure consistent performance
- Different grit sizes available for various clinical application
- Shank and working end are produced from a single blank
- Durable with precise concentricity
Indications:
Chairside
- Cavity and crown preparation, adjusting direct resin restorations
Laboratory
- Fine adjustment on ceramic and resin crowns, bridges, inlays and onlays as well as to finish approximal areas -
IOS No.: 173
Head Length (mm): 10
Head Size (1/10mm): 016
Total Lengh: Regular
Band Color: Unbanded -
Use intermittently with low pressure and water coolant:
Recommended Speed Range: Less than 300,000 rpm
Specially designed diamond charged FG points that mimic carbide burs to ensure rapid and smooth cutting efficiency during cavity preparation and trimming/ fine finishing of composite restorations.
Packing:
10's/Kit
-
Benefits:
- Precise and uniform distribution of diamond particles ensures accurate cavity preparation and an exceptionally smooth surface finish
- Specially made diamond burs ensure high cutting efficiency with low contact pressure and consistent performance
- Sturdy stainless steel shank ensures precise concentricity with virtually no vibration
- Feather-light strokes assure minimal heat generation for maximum patient comfort
- Hybrid Points come in 12 popular shapes/ sizes
- T&F Hybrid Points (with yellow banded shank) come in 10 different shapes/ sizes -
0925-1
ISO No.: 018
Head Length (mm): 1.6
Bur No.: 7006
0927-1
ISO No.: 014
Head Length (mm): 3.0
Bur No.: 7104
0929-1
ISO No.: 018
Head Length (mm): 3.5
Bur No.: 7106
0931-1
ISO No.: 014
Head Length (mm): 3.0
Bur No.: 7404
0933-1
ISO No.: 018
Head Length (mm): 3.5
Bur No.: 7406
0935-1
ISO No.: 012
Head Length (mm): 4.0
Bur No.: 7803
0937-1
ISO No.: 009
Head Length (mm): 3.7
Bur No.: 7901
0939-1
ISO No.: 012
Head Length (mm): 4.2
Bur No.: 7903
0941-1
ISO No.: 013
Head Length (mm): 6.0
Bur No.: LT1
0943-1
ISO No.: 011
Head Length (mm): 8.0
Bur No.: LT2
-
Recommended Speed Range: 300,000-450,000 rpm (Cyan Colour: max 450,000 rpm, Red Colour: Max 300,000 rpm)
Contact Pressure: 0.8 N
Specially designed diamond charged FG points that mimic carbide burs to ensure rapid and smooth cutting efficiency during cavity preparation and trimming/ fine finishing of composite restorations.
Packing:
6/Box
-
Benefits:
- Precise and uniform distribution of diamond particles ensures accurate cavity preparation and an exceptionally smooth surface finish
- Specially made diamond burs ensure high cutting efficiency with low contact pressure and consistent performance
- Sturdy stainless steel shank ensures precise concentricity with virtually no vibration
- Feather-light strokes assure minimal heat generation for maximum patient comfort
- Hybrid Points come in 12 popular shapes/ sizes
- T&F Hybrid Points (with yellow banded shank) come in 10 different shapes/ sizes -
ISO No.: 011
Head Length (mm): 8.0
Bur No.: LT2 -
Recommended Speed Range: 300,000-450,000 rpm (Cyan Colour: max 450,000 rpm, Red Colour: Max 300,000 rpm)
Contact Pressure: 0.8 N
Specially designed diamond charged FG points that mimic carbide burs to ensure rapid and smooth cutting efficiency during cavity preparation and trimming/ fine finishing of composite restorations.
Packing:
6/Box
-
Benefits:
- Precise and uniform distribution of diamond particles ensures accurate cavity preparation and an exceptionally smooth surface finish
- Specially made diamond burs ensure high cutting efficiency with low contact pressure and consistent performance
- Sturdy stainless steel shank ensures precise concentricity with virtually no vibration
- Feather-light strokes assure minimal heat generation for maximum patient comfort
- Hybrid Points come in 12 popular shapes/ sizes
- T&F Hybrid Points (with yellow banded shank) come in 10 different shapes/ sizes -
ISO No.: 013
Head Length (mm): 6.0
Bur No.: LT1 -
Recommended Speed Range: 300,000-450,000 rpm (Cyan Colour: max 450,000 rpm, Red Colour: Max 300,000 rpm)
Contact Pressure: 0.8 N
Specially designed diamond charged FG points that mimic carbide burs to ensure rapid and smooth cutting efficiency during cavity preparation and trimming/ fine finishing of composite restorations.
Packing:
6/Box
-
Benefits:
- Precise and uniform distribution of diamond particles ensures accurate cavity preparation and an exceptionally smooth surface finish
- Specially made diamond burs ensure high cutting efficiency with low contact pressure and consistent performance
- Sturdy stainless steel shank ensures precise concentricity with virtually no vibration
- Feather-light strokes assure minimal heat generation for maximum patient comfort
- Hybrid Points come in 12 popular shapes/ sizes
- T&F Hybrid Points (with yellow banded shank) come in 10 different shapes/ sizes -
ISO No.: 012
Head Length (mm): 4.2
Bur No.: 7903 -
Recommended Speed Range: 300,000-450,000 rpm (Cyan Colour: max 450,000 rpm, Red Colour: Max 300,000 rpm)
Contact Pressure: 0.8 N
Specially designed diamond charged FG points that mimic carbide burs to ensure rapid and smooth cutting efficiency during cavity preparation and trimming/ fine finishing of composite restorations.
Packing:
6/Box
-
Benefits:
- Precise and uniform distribution of diamond particles ensures accurate cavity preparation and an exceptionally smooth surface finish
- Specially made diamond burs ensure high cutting efficiency with low contact pressure and consistent performance
- Sturdy stainless steel shank ensures precise concentricity with virtually no vibration
- Feather-light strokes assure minimal heat generation for maximum patient comfort
- Hybrid Points come in 12 popular shapes/ sizes
- T&F Hybrid Points (with yellow banded shank) come in 10 different shapes/ sizes -
ISO No.: 009
Head Length (mm): 3.7
Bur No.: 7901 -
Recommended Speed Range: 300,000-450,000 rpm (Cyan Colour: max 450,000 rpm, Red Colour: Max 300,000 rpm)
Contact Pressure: 0.8 N
Specially designed diamond charged FG points that mimic carbide burs to ensure rapid and smooth cutting efficiency during cavity preparation and trimming/ fine finishing of composite restorations.
Packing:
6/Box
-
Benefits:
- Precise and uniform distribution of diamond particles ensures accurate cavity preparation and an exceptionally smooth surface finish
- Specially made diamond burs ensure high cutting efficiency with low contact pressure and consistent performance
- Sturdy stainless steel shank ensures precise concentricity with virtually no vibration
- Feather-light strokes assure minimal heat generation for maximum patient comfort
- Hybrid Points come in 12 popular shapes/ sizes
- T&F Hybrid Points (with yellow banded shank) come in 10 different shapes/ sizes -
ISO No.: 012
Head Length (mm): 4.0
Bur No.: 7803 -
Recommended Speed Range: 300,000-450,000 rpm (Cyan Colour: max 450,000 rpm, Red Colour: Max 300,000 rpm)
Contact Pressure: 0.8 N
Specially designed diamond charged FG points that mimic carbide burs to ensure rapid and smooth cutting efficiency during cavity preparation and trimming/ fine finishing of composite restorations.
Packing:
6/Box
-
Benefits:
- Precise and uniform distribution of diamond particles ensures accurate cavity preparation and an exceptionally smooth surface finish
- Specially made diamond burs ensure high cutting efficiency with low contact pressure and consistent performance
- Sturdy stainless steel shank ensures precise concentricity with virtually no vibration
- Feather-light strokes assure minimal heat generation for maximum patient comfort
- Hybrid Points come in 12 popular shapes/ sizes
- T&F Hybrid Points (with yellow banded shank) come in 10 different shapes/ sizes -
ISO No.: 018
Head Length (mm): 3.5
Bur No.: 7406 -
Recommended Speed Range: 300,000-450,000 rpm (Cyan Colour: max 450,000 rpm, Red Colour: Max 300,000 rpm)
Contact Pressure: 0.8 N