HS Maxima Diamond Bur Friction Grip 5/Pack - Flat End Cylinder, Modified Cylinder
HS Maxima Diamond Bur Friction Grip 5/Pack - Flat End Cylinder, Modified Cylinder
Special Triton™ coating for strengthened diamond coating
60% diamond grain exposure for fast cutting
Shape:
835, 836, 837: Flat End Cylinder;
835R, 836R, 837R: Modified Cylinder
Packing:
5/Pack
-
- Pure natural diamonds with larger exposure of each diamond crystal
- Uniform diamond coating,including the tips
- Less heat development
- Faster cutting
- Available as a blister pack within a sleeve
- Color-coded shank for easy identification -
Length(mm):
835, 835KR: 4.0
836, 836KR: 6.0
837, 837KR: 8.0
Total Length(mm): 19
835, 835KR: 19
836, 836KR: 21
837, 837KR: 22
Shank Type: Friction Grip
Tip Type: Flat End Cylinder / Modified Cylinder
Band Color:
Super Fine: Yellow;
Fine: Red;
Medium: Blue;
Coarse: Green;
Super Coarse: Black
-
HS CyberFill 45 Amalgam Non Gamma II High Copper 50/Pack
HS CyberFill 45 Amalgam Non Gamma II High Copper 50/Pack
- High copper, non-gamma 2 amalgam - spherical/lathe cut mix
- Outstanding dimensional stability
- Excellent marginal integrity
- High corrosion resistance
Packing:
50/Pack
-
-
Composition: Silver 45%, Tin 31.5%, Copper 23%, 0.5% Tin
-
Formula with Natural Arginine and High Fluoride (1450ppm F). Contains a mild Amino Acid* that penetrates hard-to-clean areas to help remove plaque*. Suitable for aged 8 and above
Packing:
12's/Dozen; 75ml/Tube
GC Fuji PLUS consistency delivers outstanding performance, due to the additional benefits gained from resin reinforcement of glass ionomer cement. GC Fuji Plus is a multi-purpose cement that can be used for most luting procedures.
Packing:
1 x 15g Powder
1 x 8g Liquid
1 x 6.5ml Conditioner
-
Characteristics & benefits
- Easy mixing and smooth handling
- Excellent mechanical properties
- Chemical adhesion to tooth structure eliminates complex and moisture sensitive bonding procedures
- Strong adhesion to metal, resin and silanated porcelain
- Minimal film thickness for easy seating and improved fit
- No post-operative sensitivity
- Very low solubility
- Radiopacity
- Optimal marginal seal in combination with the GC Fuji PLUS Conditioner
- Continued high fluoride release
Indications
CG Fuji PLUS is multi-purpose, able to cement posts, metal-based restorations, ceramic inlays, reinforced ceramic crowns and bridges and all kinds of acrylic/resin crowns, inlays, onlays and bridges. -
-
Clean with water. Apply GC Fuji PLUS Conditioner, leave for 20 sec, rinse with water and dry. Do not desiccate. Apply GC Fuji PLUS to both restoration and prepared tooth, and start to seat the crown within 30 sec of completing the mixing. Remove excess material at the first formation of gel stage.
- Push button chuck
- One-piece stainless steel body
- Ergonomic design
- Easy-to-grip handle with anti-slippery design
- External water spray
Max Rotation Speed: ≥40,000 rpm/min
Packing:
Each
[1111] Parkell Blu-Mousse VPS Bite Registration Material 2x50ml/kit
[1111] Parkell Blu-Mousse VPS Bite Registration Material 2x50ml/kit
A Legacy VPS Bite Registration for Decades
For decades, Blu-Mousse, has been the bite registration material of choice for discerning dental clinicians worldwide. These astute dentists appreciate the ability of Blu-Mousse to precisely capture the interocclusal relationship, which enables labs to deliver crowns that often need minimal or no occlusal adjustment.
Set Time: 30 seconds
Scent: unscented
Packing:
2 x 50ml Split Cartridges
6 x Mixing-Tips
-
- Stays stacked on the occlusal surface during placement.
- Optimal consistency allows patient to naturally close with zero resistance while capturing every detail.
- Hardens to a plaster-like final set with a durometer of 88 to ensure precise articulations.
- Does not distort between the time the bite is taken and when the lab articulates the models.
- Resists breakage on removal from the mouth, during trimming of excess flash and when used to r position models during articulation.
-
-
The novel third generation PERIOFLOW Nozzle with a 25% slimmer, more flexible and gentle design for increased patient comfort.
The enhanced body design offers better access and improved pocket conformability to reach more periodontal and peri-implant areas smoothly and safely.
- Slim: Better access
- Safe: Reduced intra-pocket pressure
- Higher patient comfort
- Higher efficiency
Packing:
40's/pack
-
Designed with a trilateral powder-outlet and an apical water-only spray, biofilm can be safely removed from residual pockets thanks to the vortex-principle that is created. The design includes a measuring scale on each disposable nozzle (3mm, 5mm, 7mm, 10mm) for accurate measurements of pocket depth that allow a controlled application.
