2024 Shofu Cements

A radio-opaque glass ionomer luting material is now available in capsules for a simple, fast and predictable application.

Packing:
Zirconomer P 1-1 Set (PN C0040)(Powder 12g & Liquid 5ml)

Brochures
Zirconomer P

Instructions for Use
Zirconomer P

• Product Features
• Specifications
• Usage Instruction

• - Zirconomer P features a robust architecture that strengthens and reinforces tooth structure while providing a secure marginal seal for strong and durable posterior restorations.
  - The self-adhesive restorative material eliminates the risk of polymerization shrinkage and facilitates a stable chemical bond to natural dentin and enamel without any interfacial stresses for greater longevity, minimal post-op sensitivity and optimal dimensional stability.
  - Zirconomer P saves clinical time as no priming, bonding or extensive tooth preparation are needed. All you need to restore defects, is mix, bulk-fill cavities and finish at one go, while preserving healthy tooth structure.
  - The biocompatible, monomer and mercury free, amalgam alternative is safe for patients of all ages and prevents secondary caries by providing a fluoride-rich milieu. Suitable for standard and high caries risk cases, Zirconomer P ensures predictability with total peace of mind.

Coat-It is a light-cured self-adhesive resin coat designed to provide a strong and protective seal on the surface of Glass Ionomers, provisionals and direct resins for enhanced mechanical properties, durability and aesthetics of the restoration.

Packing:
Coat It 6ml
50 x Disposable Brush Fine (Pink)
25 x V-Dish

• Product Features
• Specifications
• Usage Instruction

• - Remarkably natural surface gloss with just 10 seconds of cure
  - High degree of surface cure with minimal residual monomer
  - Seals, protects and strengthens surface of glass ionomers, provisional restoration and direct resins
  - Remarkable wear and stain resistance for restorations that remain stable over time
  - Exceptionally strong and durable bond to various substrates- to enamel, dentin, glass ionomer and resins with virtually no gap
• All it takes is a thin layer of Coat-It (LED / Halogen) to significantly decrease the surface roughness on the Glass Ionomer restoration and boost its strength.

BeautiLink SA is a two-component, dual-cure, self-adhesive resin cement formulated for swift, simple and secure adhesion to a multitude of dental substrates, ranging from tooth abutment to zirconia, porcelain, lithium disilicate, metal, hybrid ceramics and indirect composites. The novel multifunctional monomer formulation with unique silane coupling agent and innovative, highly reactive, yet stable catalyst, facilitates strong, reliable and lasting bond in both light and chemical cure modes, with a secure marginal seal and virtually no post-op sensitivity. 

Packing:
Handmix: 9 ml
Automix: 5 ml with 10 x Mixing tips

Brochures
BeautiLink SA
BeautiLink SA Brief

Instructions for Use
BeautiLink SA

Safety Data Sheets
BeautiLink SA

• Product Features
• Specifications
• Usage Instruction

• - Designed to streamline inventory with reliable adhesion to a wide range of substrates including enamel, dentin, zirconia, lithium disilicate, metal, hybrid ceramics and indirect composites
  - Novel multi-functional monomer formulation assures strong, resilient bond and remarkable mechanical properties for greater resistance to occlusal stresses
  - Exhibits optimal viscosity and even, bubble-free layer with low film thickness of 14 µm for a precise fit and seamless margins
  - Time efficient with easy application and quick, mess-free clean-up
  - The opaque shade has superior masking ability, ideal for discoloured and metal abutments
  - Provides greater patience compliance with virtually no post-op sensitivity
  - Proprietary S-PRG filler technology provides sustained anti-cariogenic and anti-bacterial benefits
• BeautiLink SA is formulated for reliable cementation of inlays, onlays, crowns, bridges, adhesive bridges and veneers.  It pairs synergistically with BeautiBond Xtreme to enhance adhesion of non-retentive restorations (onlays, veneers, etc)  while also reinforcing the bond to hybrid ceramic and lithium disilicate restorations.
• 
  

 GlasIonomer FX Ultra capsule features a novel “high-trans fluoroaluminosilicate glass (HT glass)” with “dual surface treatment” and “anti-cluster molecule”, that reacts homogeneously with “high performance polycarboxylic acid co-polymer”, to facilitate optimal working time, a rapid increase in translucency and sharp set of the self-cure restorative glass ionomer.

Packing:
1 Set

Brochures
GlasIonomer FX Ultra

• Product Features
• Specifications
• Usage Instruction

• -Translucent & Aesthetic: Developed with “HT” glass that imparts the highest level of translucency for better aesthetics and easier shade match
  -Strong & Durable: Special “high-performance polycarboxylic acid co-polymer” fosters strong ionic bonds with multivalent ions to ensure strong, stable and durable restorations.
• 
  
• 
  

GlasIonomer FX Ultra is a highly translucent, self-adhesive and durable glass ionomer, developed to meet the daily restorative needs of patients across the entire age spectrum, with the convenience of capsule delivery.

Packing:
Available in a box of 50 capsules (each capsules weighs 0.61 gm)

Brochures
GlasIonomer FX Ultra Capsule

Instructions for Use
GlasIonomer FX Ultra Capsule

• Product Features
• Specifications
• Usage Instruction

• - Excellent aesthetics with high translucency for better shade match
  - Superior mechanical properties for durable & lasting restorations
  - Time efficient with optimal working time & quick set at intra-oral temperature
  - Convenience of capsule delivery with one-step, capsule activation for fast and easy mix.
  - Optimal fluoride release and recharge that protects and reinforces tooth structure
  - Stable & reliable with low acid erosion and solubility
  - Comes in Shades: A2, A3, A3.5

A non-eugenol, polycarboxylate based temporary cement designed for temporary cementation of provisional crowns, fixed restoration and implant prosthesis, indirect pulp capping and temporary sealing of prepared cavities as an intermediate restorative.

Contains the patented HY-Agent additive with tannin-fluoride that seals dentinal tubules to prevent pulpal irritation.

Packing:
1 x 125g Powder
1 x 70g Liquid
1 x Mixing Pad, Spatula

Instructions for Use
HY-Bond Temporary Cement (Soft)

• Product Features
• Specifications
• Usage Instruction

• - Ensures easy removal with sufficient adhesive strength for short-term cementation
  - Easy to mix, manipulate and apply
  - Fast setting and easy to clean up
  - Minimum odour and taste
• 
  
• 
  

A newly formulated radiopaque, Resin Modified Glass Ionomer (RMGI) Cement for luting metal-ceramic, full metal and metal-free crowns, bridges, inlays and onlays as well as orthodontic brackets. 

Packing:
Powder 15 gm & Liquid 8.6 ml (1103), Mixing Pad

• Product Features
• Specifications
• Usage Instruction

• - Chemically bonds to tooth structure to ensure higher bonding strength
  - Fluoride Release & Biocompatible.
  - Low film thickness of just 12μ
  - Minimum odour and virtually no post-operative sensitivity
  - Improved fracture toughness and low solubility for intra-oral durability of the restoration
  - Provides an excellent marginal seal and prevents microleakage
  - Exhibits high translucency for aesthetic cases
  - Long working time with a net setting time of 4 minutes
  - Change of colour from a light pink to colourless upon setting, for ease of identification and application
  - Easy to manipulate and remove excess cement
• 
  
• 
  

HY-Bond GlasIonomer CX-Smart is a truly biocompatible contemporary luting glass ionomer that guarantees reliable cementation for lasting restorations. Both the glass and liquid polymer components in the CX-Smart formulation have been modified to enhance the working and handling properties for an easier, cleaner application.

Packing:
1 x 45g Powder
1 x 25ml Liquid
1 x Mixing Pad, Spatula

Instructions for Use
HY-Bond GlasIonomer CX Smart

• Product Features
• Specifications
• Usage Instruction

• Based on Shofu’s proven track record in self-adhesive luting technology, HY-Bond CX-Smart comprises of SHOFU’S proprietary additive- HY-agent, “a tannic acid-strontium fluoride-zinc fluoride complex” that is known to promote mineralization, increase acid resistance and reduce solubility with anti-bacterial and anti-enzymatic properties while virtually eliminating hypersensitivity.
  
  - Chemically bonds to the tooth structure for excellent marginal seal and sharp set with remarkable moisture tolerance.
  - No etch or bond for a quick, easy and simple application– ideal for paediatric, geriatric and special needs patients.
  - Resin-free, suitable for patients with resin allergy.
  - Optimal thixotropicity and even film thickness with durable physical properties, high acid resistance and low oral solubility.
  - HY-additive ensures virtually no post-operative sensitivity & favourable pulp response.
  - Cost-effective and efficient.

A non-eugenol, polycarboxylate based temporary cement designed for temporary cementation of provisional crowns, fixed restoration and implant prosthesis, indirect pulp capping and temporary sealing of prepared cavities as an intermediate restorative.

Contains the patented HY-Agent additive with tannin-fluoride that seals dentinal tubules to prevent pulpal irritation.

Packing:
1 x 60g Powder
1 x 35g (30ml) Liquid
1 x Mixing Pad, Spatula

Instructions for Use
HY-Bond Temporary Cement (Soft)

• Product Features
• Specifications
• Usage Instruction

• - Ensures easy removal with sufficient adhesive strength for short-term cementation
  - Easy to mix, manipulate and apply
  - Fast setting and easy to clean up
  - Minimum odour and taste
• 
  
• 
  

The only zinc phosphate cement that can be applied over freshly cut dentin without causing any pulpal irritation due to the HY-Agent additive which is helps to nullify the harshness of the phosphoric acid. Traditional luting agent for cementation of cast restorations and orthodontic appliances.

Packing:
1 x 60g Powder
1 x 40g Liquid

• Product Features
• Specifications
• Usage Instruction

• - Offers high compressive strength and good film thickness with adequate radiopacity
  - Seals dentinal tubules and minimizes post-operative sensitivity
  - Radiopaque
  - Less technique sensitive with superior handling
  - Minimized solubility to oral fluids
• 
  
• 
  

Developed with SHOFU’s patented HY-Agent additive (tannin-fluoride), HY-Bond Polycaroboxylate cement is indicated specifically for successful cementation of cast restorations and orthodontic appliances. The HY-Agent helps to minimize post-operative sensitivity and increase compressive strength.

Packing:
1x 60g Powder
1 x 33ml Liquid
1 x Mixing Pad, Spatula

Instructions for Use
HY-Bond Polycarboxylate Cement

• Product Features
• Specifications
• Usage Instruction

• - Chemically adheres to tooth structure and cast appliances
  - Exhibits high adhesive strength and low solubility
  - Radiopaque, easy to mix and manipulate with a very low film thickness
  - Can be placed on freshly cut dentin with no pulpal irritation
  - Less technique sensitive due to the tannin-fluoride additive
• 
  
•